Gledhill BoilerMate CP Parts & Spares Guide

Explaining the Components of Your Gledhill BoilerMate CP: A Comprehensive Parts & Spares Guide

Your Gledhill BoilerMate CP plays a vital role in providing hot water and heating to your home. Understanding its key components can help you troubleshoot issues and ensure optimal performance. Here's a breakdown of each part:

  • Immersion O Ring ZB004: This O-ring provides a watertight seal between the immersion heater and the BoilerMate CP, preventing leaks and ensuring efficient heating.

  • Sensor Nut And Olive GT295: The sensor nut and olive secure temperature sensors in place, allowing them to accurately monitor water temperature within the BoilerMate CP.

  • Thermostat Rod XB081: The thermostat rod regulates the water temperature, ensuring it remains within safe and comfortable limits for domestic use.

  • 90 Degree Isolation Valve GT135: These valves control the flow of water within the BoilerMate CP, allowing for easy maintenance and repair.

  • Sensor GT198: Sensors monitor various parameters within the BoilerMate CP, providing important data for temperature regulation and system diagnostics.

  • PHE Pump Washers XC008: These washers provide a secure seal for the connections of the plate heat exchanger (PHE) pump, preventing leaks and ensuring efficient heat transfer.

  • Straight Isolation Valve GT133: Similar to the 90-degree isolation valve, these valves control water flow and facilitate maintenance.

  • PCB Stand Off Pegs (Set of 4) XB045: These stand-off pegs securely mount the printed circuit board (PCB) within the BoilerMate CP, ensuring stability and proper functioning.

  • Y Strainer XB314: The Y strainer filters out debris and impurities from the water, preventing damage to internal components and maintaining water quality.

  • Plate Heat Exchanger (24 Plate) GT017: The plate heat exchanger transfers heat between the boiler water and the domestic hot water, ensuring efficient heating.

  • Main PCB (Pre Sept 2015 Models) XB103 / Main PCB XB111: The main PCB controls the operation of the BoilerMate CP, managing temperature, pump operation, and other functions.

  • Plastic F And E Tank XB343: The feed and expansion tank accommodates thermal expansion and provides a reservoir for makeup water, maintaining optimal system pressure.

  • PHE Pump Upr 15-50 (Pre Sept 2015 Models) GT089: This pump circulates water through the plate heat exchanger, facilitating heat transfer between the boiler and the domestic hot water.

  • Immersion Heater 3Kw Sh003: The immersion heater heats the water within the BoilerMate CP, providing hot water for domestic use.

Understanding these components will empower you to maintain your Gledhill BoilerMate CP effectively and troubleshoot any issues that may arise. If you encounter difficulties, always consult a qualified technician for assistance.