Common Faults with Gledhill Boilermate 2

Fault Finding Guide and troubleshooting for Gledhill Boilermate 2 System

Note: All maintenance and repairs should be conducted by a certified engineer. The contents below have been extracted from the following provided by the manufacturer.

Download Here : Gledhill BoilerMate 2 Manual

Buy Gledhill BoilerMate 2 Parts & Spares Here

 

Common issues encountered with Gledhill Boilermate 2 systems include:

  1. Insufficient Hot Water: This problem may arise due to issues with the immersion heater, thermostat, or plate heat exchanger. Additionally, inadequate hot water supply could signal problems with the boiler or heating system.

  2. Heating Failure: Failures in the heating function could stem from faults in the boiler, pump, motorised valves, or thermostat. Airlocks within the system or low water pressure might also hinder proper heating.

  3. Leaks: Leaks may manifest in various parts of the system, including pipes, valves, or the tank itself. Swift repair of leaking components is essential to prevent water wastage and damage to adjacent areas.

  4. Noisy Operation: Noisy pumps or boilers could indicate the presence of air in the system, incorrect pump settings, or mechanical issues with components. Proper venting and adjustment of pump speed may mitigate these noises.

  5. Scale Accumulation: Scale deposits, common in hard water areas, can accumulate over time, diminishing system efficiency and potentially damaging components. Regular maintenance and descaling procedures may be necessary to address this concern.

  6. Electrical Malfunctions: Issues with electrical components such as wiring, controls, or sensors can lead to various system malfunctions. It is imperative to engage a qualified engineer to diagnose and rectify these issues.

  7. Temperature Regulation Problems: Inaccurate temperature control may result from faulty thermostats or sensors. Calibration or replacement of these components may be necessary to restore proper temperature regulation.

  8. Overheating: Overheating of the system may occur due to faults in thermostats, sensor malfunctions, or incorrect settings. Immediate attention is required to address safety concerns and prevent potential system damage.

  9. Corrosion: Corrosion, particularly prevalent in older systems, can lead to leaks, reduced efficiency, and system failures. Regular inspection and maintenance are vital to identify and address corrosion-related issues.

  10. Pressure Loss: Loss of pressure within the system may result from leaks, faulty pressure relief valves, or issues with the expansion vessel. Proper maintenance and pressure monitoring are crucial to prevent further damage.

It is imperative to promptly address these common problems to ensure the efficient and safe operation of the Gledhill Boilermate 2 system. Certified engineers should diagnose and repair any issues in adherence to the manufacturer's guidelines and recommendations.