Gledhill BoilerMate A-Class Parts & Spares Guide

Discover Your Gledhill BoilerMate A-Class: Understanding Key Parts & Spares Guide

Your Gledhill BoilerMate A-Class is an essential part of your home's heating and hot water system, ensuring comfort and reliability. To help you understand its components better, here's a detailed guide explaining each part and its role:

  • PHE Pump Washers XC008: These washers provide a tight seal for the connections of the plate heat exchanger (PHE) pump, preventing leaks and ensuring efficient heat transfer.

  • Immersion Washer FT407: This washer seals the connection between the immersion heater element and the BoilerMate A-Class, preventing leaks and ensuring effective heating of water.

  • Sensor Nut And Olive GT295: The sensor nut and olive secure sensors in place, ensuring accurate temperature readings within the system.

  • Remote Clock Fixing Kit (XB217): This kit contains the necessary components to securely install and mount the remote clock, providing convenient access for time adjustments and scheduling.

  • MCB Single Pole 6A XB025: This miniature circuit breaker (MCB) protects the BoilerMate A-Class from electrical overloads, safeguarding against damage and ensuring safety.

  • Straight Isolation Valve GT133: These valves allow for manual shut-off of water flow, enabling maintenance or repair work to be carried out without affecting the entire system.

  • Sensor GT198: This sensor monitors various parameters within the BoilerMate A-Class, such as temperature or pressure, ensuring optimal performance and safety.

  • Power Relay Clip XB179: This clip securely holds the power relay in place, ensuring stable and reliable operation of electrical components.

  • Overheat Sensor GT199: This sensor detects excessively high temperatures within the system, triggering safety mechanisms to prevent damage or hazards.

  • Electro Mechanical Clock XB215: The electro-mechanical clock provides timing functions for scheduling the operation of the BoilerMate A-Class, allowing for convenient heating and hot water management.

  • 90 Degree Isolation Valve GT135: These valves are designed to provide a 90-degree turn to isolate or regulate the flow of water within the system, facilitating maintenance and repair tasks.

  • PCB Stand Off Pegs (Set of 4) XB045: These pegs support and space the printed circuit boards within the BoilerMate A-Class, ensuring proper alignment and electrical connections.

  • On - Off Rocker CA006: This rocker switch allows users to manually turn the BoilerMate A-Class system on or off, providing control and convenience.

  • Modulating Grundfos 15/50 Pump (For PHE) GT089: This pump modulates its speed to adjust the flow rate of water through the plate heat exchanger, optimizing energy efficiency and heat transfer.

  • Grundfos 15/60 Pump (Boiler/Central Heating) XB241 (Replacement Pump) XB1016: This pump circulates water between the boiler and central heating system, ensuring efficient heat distribution.

  • Filling Loop (Sp Models Only) XG004/5/6 XG118: This component allows for the easy filling and pressurization of the BoilerMate A-Class system, ensuring proper operation and performance.

  • F + E Tank XB343: The feed and expansion tank provides a reservoir for makeup water and accommodates thermal expansion, ensuring optimal system pressure and performance.

  • 28mm Pump Isolating Valve XB122: This valve isolates the pump from the rest of the system, facilitating maintenance and repair work without draining the entire system.

  • 24 Litre Expansion Vessel (Sp Models Only) XG216: This expansion vessel accommodates thermal expansion of water within the system, maintaining optimal pressure levels.

  • 22mm Motorised Valve (Sp Models Only) XG130: This motorized valve controls the flow of water in specific zones of the heating system, allowing for precise temperature control and energy efficiency.

  • Y Strainer XB314: The Y strainer filters out debris and impurities from the water supply, preventing blockages and ensuring smooth operation of the BoilerMate A-Class.

  • Relay XB178: This relay controls the operation of various electrical components within the BoilerMate A-Class, ensuring coordinated and efficient functioning.

  • Plate Heat Exchanger GT017: The plate heat exchanger transfers heat between different fluid streams within the system, facilitating efficient heating of domestic hot water.

  • Main PCB Controller GT490: This printed circuit board serves as the central control unit for the BoilerMate A-Class, coordinating the operation of various components for optimal performance.

  • Flow Regulator GT086: The flow regulator controls the flow rate of water within the system, optimizing energy efficiency and preventing overheating.

  • Expansion Relief Valve (Sp Models Only) XG154: This valve relieves excess pressure from the system, protecting against damage and ensuring safety.

  • By-Pass Valve XG182: The by-pass valve regulates water flow through a bypass circuit, ensuring balanced system pressure and preventing overheating.

  • 28mm Motorised Valve (Sp Models Only) XG142: This motorized valve controls water flow to specific zones of the heating system, allowing for individual temperature control and energy efficiency.

  • 22mm Pump Isolating Valve XB121: This valve isolates the pump from the rest of the system, facilitating maintenance and repair work without draining the entire system.

  • 12 Litre Expansion Vessel (Sp Models Only) XG214: This expansion vessel accommodates thermal expansion of water within the system, maintaining optimal pressure levels.

  • Digital Clock XB216: The digital clock provides accurate timekeeping and scheduling features for the BoilerMate A-Class, allowing for precise control of heating and hot water functions.

Understanding these components will empower you to better maintain and troubleshoot your Gledhill BoilerMate A-Class, ensuring optimal performance and longevity. If you encounter any issues or require assistance, consult a qualified technician for support.