Common Faults with Gledhill Boilermate CP

Fault Finding Guide and troubleshooting for Gledhill Boilermate CP System

Note: All maintenance and repairs should be conducted by a certified engineer. The contents below have been extracted from the following provided by the manufacturer.

Download Here : Gledhill BoilerMate CP Manual

Buy Gledhill BoilerMate CP Parts & Spares Here

Common problems with Gledhill Boilermate CP systems may include:

  1. No Hot Water: This can be caused by issues with the immersion heater, thermostat, or plate heat exchanger. Insufficient hot water could also indicate problems with the boiler or heating system.

  2. No Heating: Failure of the heating function may result from faults in the boiler, pump, motorised valves, or thermostat. Airlocks in the system or low water pressure can also prevent proper heating.

  3. Leaks: Leaks can occur in various parts of the system, including pipes, valves, or the tank itself. Leaking components should be promptly repaired to prevent water wastage and damage to surrounding areas.

  4. Noisy Operation: Noisy pumps or boilers may indicate air in the system, improper pump settings, or mechanical issues with the components. Proper venting and adjustment of pump speed may help resolve these noises.

  5. Scale Buildup: In hard water areas, scale deposits can accumulate in the system over time, leading to reduced efficiency and potential damage to components. Regular maintenance and descaling may be necessary to address this issue.

  6. Electrical Faults: Problems with electrical components such as wiring, controls, or sensors can cause various malfunctions in the system. These issues should be diagnosed and repaired by a qualified engineer.

  7. Temperature Control Issues: Inaccurate temperature control may result from faulty thermostats or sensors. Calibration or replacement of these components may be required to restore proper temperature regulation.

  8. Overheating: Overheating of the system can occur due to thermostat faults, sensor malfunctions, or improper settings. This can lead to safety concerns and potential damage to the system, requiring immediate attention.

  9. Corrosion: Corrosion of components, particularly in older systems, can lead to leaks, reduced efficiency, and system breakdowns. Regular inspection and maintenance can help identify and address corrosion issues.

  10. Pressure Loss: Loss of pressure in the system may result from leaks, faulty pressure relief valves, or issues with the expansion vessel. Proper maintenance and monitoring of pressure levels are essential to prevent further damage.

It's important to address these common problems promptly to ensure the efficient and safe operation of the Gledhill Boilermate CP system. Qualified engineers should diagnose and repair any issues following the manufacturer's guidelines and recommendations.